Page 157 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

ENGINE INSTALLATION - 325 7. Install the rear engine mount fasteners.
Use the following procedure to reinstall the engine
assembly.

1. Attach engine with suitable lifting straps to an
overhead or portable engine hoist.
2. Remove the engine stand adapter plate.
3. Use the overhead or portable engine hoist and
suitable engine straps to lower the engine onto the
left footwell support.
3
NOTE
Have an assistant help guide the engine in and out of
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.

IMPORTANT
4. Remove the lifting straps and overhead or portable
engine hoist and remove the support previously Do not tighten fasteners at this time.
installed under the transmission case during the
engine removal process.
8. Install NEW front engine mounts and fasteners.
5. Have an assistant help lift and rotate the engine into
the frame.
6. Install the engine to transmission coupler onto the
engine. Torque NEW bolts in sequence (see image
below) to specification.

IMPORTANT
Do not tighten fasteners at this time.

9. Torque the rear engine mount fasteners to
TORQUE specification.
Engine to Transmission Coupler Engine Mounting TORQUE
Bolts:
44 ft-lbs (59 Nm) (In sequence) Rear Engine Mount to Frame Fasteners:
23 ft-lbs (31 Nm)

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 3.35
© Copyright Polaris Industries Inc.