Page 159 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

3

19.Connect the harness leads to the IAC valve e, TPS 24.If removed insert the CPS into the stator cover and
r, T-MAP sensor t. Verify routing is correct. torque cps fastener to specification.
20.Connect the fuel injector harness lead u to the fuel TORQUE
injector.
Crankshaft Position Sensor (CPS) Fastener:
21.Connect the fuel line to the fuel raili.
9 ft-lbs (12 Nm)
22.Connect the ignition coil harness connector and
install the spark plug wire.
25.Connect the stator wire connector and verify that it is
23.Connect the CPS sensor to the vehicle wiring secure to the front engine mount bracket.
harness and install the strain relief.
26.Install the inner clutch cover as outlined in the PVT
System Chapter.
27.Install the drive clutch, driven clutch, belt and outer
clutch cover as outlined in Chapter 6. Be sure all hose
and wire routings are correct. Torque all fasteners to
specification as outlined in Chapter 6.(See CLUTCH
ALIGNMENT, page 5.19)

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 3.37
© Copyright Polaris Industries Inc.