Page 160 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

28.Install the Breather Box.

29.Install the airbox assembly.
NOTE

Take care to properly connect the air intake boot to the
throttle body and tightent the hose clamp.

30.Install the PVT inlet/exhaust ducts and the airbox top.
31.Remove the pressure cap and fill the cooling system
through the filler neck with properly mixed anti-freeze
/ coolant.
32.Install a new oil filter. Lubricate the seal with engine
oil prior to installation (see ).
33.If the engine oil was completely drained, add
approximately 1.75 quarts (1.65 L) of Polaris PS-4
Synthetic Engine Oil into the crankcase.
34.Connect the (-) negative battery cable to the battery.
35.Install the fuel tank, front cab (if required) , footwells,
side panel, and seats. (SeeBODY, page 10.7)

NOTE
Install the right passenger footwell on touring models at
this time.

36.Follow the “Cooling System Bleeding Procedure” as
outlined in this chapter.(SeeCooling System Bleeding
Procedure - 570, page 3.119)
37.Start engine and check for any oil or coolant leaks.
38.Check the engine oil level (see Engine Oil Level -
570, page 2.19).
39.Refer customer to “Engine Break-In Period, page
3.138” upon returning vehicle to customer.
40.Verify proper operation before delivery to customer.

3.38 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.