Page 439 - Manual Oficina Polaris Sportsman 570 2014 a 2016
P. 439
PVT SYSTEM
CLUTCH ASSEMBLY 3. Line up the “X” on the moveable sheave with the “X”
1. Install a new bearing onto the clutch shaft using an on the stationary sheave or use the marks previously
arbor press. Once bearing is fully seated, install a used. Put the sheaves together.
new snap ring.
2. Install the shaft and bearing assembly into the outer 5
sheave.
NOTE
Press only on the outer race of the bearing during
installation to prevent damaging the bearing. 4. Install the roller (A) onto the roller pin (B) on both
sides.
9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 5.53
© Copyright Polaris Industries Inc.
