Page 440 - Manual Oficina Polaris Sportsman 570 2014 a 2016

PVT SYSTEM

5. Install the roller pin into the sheave assembly on both 9. Install the spider dampener (G) inside the outer
sides. The flat side of the roller pin faces downward spider and install the inside spider plate (H).
when the shaft side is laying flat on the bench.

10. Install the spider assembly onto the shaft with the
6. Install the spring pins (C) to secure the roller pins. retaining ring on top of the spider.
Install until flush with sheave surface.
NOTE
Use the marks previously made to align the skip tooth
spider, or use the “X” on top of the spider and align it
with the skip tooth on the shaft.

7. Install the spring over the shaft.

8. Install the clutch rollers (D) onto each side of the
outside spider. Install the washers (E) and E-clips (F)
to secure the rollers. The rollers should spin freely.

5.54 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.