Page 512 - Manual Oficina Polaris Sportsman 570 2014 a 2016

FINAL DRIVE

REAR DRIVE (CV) SHAFT 3. Pull sharply outward to remove shaft from
transmission. Install a new compression ring and
INSPECTION apply an anti-sieze compound to the splines upon
assembly.
Check the front and rear driveshaft CV boots for any
tears or leaking grease. If the driveshaft boot loses all
grease, CV joint failure will occur.

INSTALLATION
1. Apply anti-seize compound to splines of shaft.
REMOVAL 2. Install a new lock ring and install the inner shaft.
1. Remove rear hub. Refer to “REAR HUB REMOVAL”
in this chapter.
2. Remove upper carrier bolt. Tip hub outward and
remove shaft from carrier.

3. Slide shaft assembly into the bearing carrier hub.

7.36 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.