Page 509 - Manual Oficina Polaris Sportsman 570 2014 a 2016

FINAL DRIVE

DRIVE (CV) SHAFTS 7. Remove the two brake caliper attaching bolts q.

FRONT DRIVE (CV) SHAFT

INSPECTION
Check the front and rear drive shaft CV boots q for any
tears or leaking grease. If the drive shaft boot loses all
grease, CV joint failure will occur.

CAUTION
Do not hang the caliper by the brake line. Use wire to
hang the caliper to prevent possible damage to the
brake line.
8. Remove hub nut w and hub assembly e.

REMOVAL
1. Set the ATV in park. Remove hub dust cap (if
equipped). 7
2. Remove cotter pin.
3. Loosen - but do not remove - the hub retaining nut.
4. Loosen - but do not remove - the wheel nuts.
5. Safely lift and support the front of the ATV.

CAUTION
Serious injury could occur if machine tips or falls. 9. Remove cotter pin and nut from lower A-arm ball
joint.
6. Remove wheel.
10. Remove lower A-arm r from ball joint using a ball
joint fork tool.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 7.33
© Copyright Polaris Industries Inc.