Page 510 - Manual Oficina Polaris Sportsman 570 2014 a 2016

FINAL DRIVE

11. Pull strut assembly out while pivoting the CV drive INSTALLATION
shaft away until it clears the strut assembly.
1. Install new compression ring on drive shaft. Apply an
12. Pull outward sharply on CV shaft assembly to anti-seize compound to splines. Align splines of drive
remove it from the gearcase. In some instances, the shaft with front gearcase and install by lightly tapping
splines may be corroded, making removal difficult. A on drive shaft with soft-faced hammer.
slide hammer or other suitable device may be 2. Install drive shaft in strut.
required for removal.
3. Install lower ball joint, torque nut to specification and
install new cotter pin.

TORQUE
Ball Joint Stud Nut, Front A-Arm:
30 ft-lbs (41 Nm)

4. Install hub e and tighten hub nut w to specification.

TORQUE
Front Hub Retaining Nut:
70 ft-lbs (95 Nm)

5. Install brake caliper and tighten bolts q to
specification.

TORQUE
Caliper Mounting Bolts:
37 ft-lbs (50 Nm)

7.34 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.