Page 513 - Manual Oficina Polaris Sportsman 570 2014 a 2016

FINAL DRIVE

4. Lift bearing carrier into place and install bolt to upper
control arm. Torque bolt to specification.

TORQUE
Hub Carrier Bolts
37 ft-lbs (50 Nm)

5. Install hub, flat washer, domed washer (domed side
out) and nut. Torque center hub nut to specification.
Install new cotter pin and hub cap.

TORQUE
Rear Hub Retaining Nut:
110 ft-lbs (149 Nm)
7
6. Install brake caliper and tighten bolts to specification.
Refer to Chapter 9.
7. Install rear wheel and torque wheel nuts to
specification.

TORQUE
Wheel Nuts:
Steel: 27 ft-lbs (37 Nm)Aluminum: 30 ft-lbs (41 Nm)
+ 1/4 Turn
8. Grease all fittings thoroughly with Premium U-Joint
Lubricant (PN 2871551).

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 7.37
© Copyright Polaris Industries Inc.