Page 115 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

CRANKSHAFT PTO SEAL INSTALLATION 2. Tighten the drive bolt e until the cylinder r bottoms
out against the crankcase.
1. Install new seal w into crankcase. Thread the drive
bolt of special tool PU-52493 q into the crankshaft.

3

3. Once the seal is properly installed, loosen the drive
bolt e and remove special tool PU-52493 from the
IMPORTANT crankshaft.
4. Refer to Inner PVT Cover installation.
The orientation of the seal is critical. Install the seal with 5. Field test the vehicle before putting back into service.
the flat side of the seal facing out as shown.
Inspect for any leaks.

9928689 - 2018 RZR RS1 Service Manual 3.29
© Copyright Polaris Industries Inc.