Page 117 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

7. Remove the right hand and left hand rear fenders by 10.Remove two fasteners and washers retaining w the
turning the 1/4 turn hinges and unhooking the two muffler heat shield.
straps.

3

11. Remove two 15mm fasteners e securing muffler to
8. Disconnect the oxygen sensor electrical connector exhaust pipe.
and hinge clip retained to the frame.

NOTE
9. Remove four torx screws q retaining muffler cover.
The nuts on the exhaust side of the clamp are weld
nuts.

12.Remove two muffler springs r.

9928689 - 2018 RZR RS1 Service Manual 3.31
© Copyright Polaris Industries Inc.