Page 118 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

13.Pull the muffler towards the rear of the vehicle to 16.Remove the upper and lower radius rods from the
remove from isolators. bearing carrier by removing two fasteners y . Allow
the radius rods to hang towards the ground.

NOTE
17.Remove two brake caliper mounting bolts t and
The remaining exhaust system does not need to be remove caliper from hub.
removed for engine removal.

14.Lift and support the rear of the vehicle.

WARNING
Use care when supporting vehicle so that it does not tip
or fall. Serious injury may occur if vehicle tips or falls.

15.Remove four lug nuts t and remove the left hand
rear wheel.

18.Remove cotter pin, castle nut, and one cone washer.
Discard cotter pin.

NOTE

Note orientation of cone washer.

3.32 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.