Page 122 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

34.Disconnect engine breather from the air intake tube 37.Remove the engine access cover by removing its
s . fastener d .

35.Remove the fastener securing two ground wires to NOTE
frame. One goes to the starter and one goes into the
main harness. Take care not to damage the radiator.

38.Reaching through the access cover, unplug the two
spark plug wires.

36.Disconnect the coolant temperature sensor connector
from the main harness.

39.Repeat steps 15–23 for the right hand side.
40.Remove the two 15mm transmission shift cable
bracket fasteners f .

3.36 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.