Page 123 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

41.Remove the circlip and hinge clip retaining the 46.Loosen the worm clamps securing the throttle bodies
Transmission/shift cable and remove from the to the engine on both the left and right side. Gently
linkage. separate from the engine.
42.Disconnect the transmission vent line g from the
transmission.

3

NOTE
43.Remove the hinge clip to the frame. The engine can be removed without removing the air
44.Disconnect the crank position sensor connector and intake and the throttle body assembly.
stator wire connector on right hand side of engine.
45.Disconnect the starter positive 10mm nut, and two 47.Remove the four engine mount fasteners h on either
hinge clips to engine.
side of the vehicle.

48.Stand the engine straight up until it is clear of the
engine mounts.

9928689 - 2018 RZR RS1 Service Manual 3.37
© Copyright Polaris Industries Inc.