Page 271 - Manual Oficina Polaris RS1 2018 e 2019

PVT SYSTEM

DRIVEN CLUTCH DISASSEMBLY / 5. Lift and remove the helix e, limiter spacer r and
INSPECTION spring t from the driven clutch.
1. Inspect the bearing q on the helix cover. The bearing
should not have deep scratches or show excessive
wear.

6. Inspect the buttons surface for wear / cracking. If
replacement is required, remove the fasteners y
retaining the buttons to the driven clutch. 5
2. Before taking the clutch apart, be sure to mark the
stationary sheave, moveable sheave, helix and cover
with a reference mark.
3. Place the driven clutch in a clutch compression tool.
4. Remove the three fasteners w retaining the driven
clutch cover.

7. Separate the moveable sheave from the stationary
sheave.

8. Inspect the sliders u in the stationary sheave for
wear and cracking. If replacement is required,
remove the fasteners i retaining the sliders to the
sheave.

9928689 - 2018 RZR RS1 Service Manual 5.19
© Copyright Polaris Industries Inc.