Page 269 - Manual Oficina Polaris RS1 2018 e 2019
P. 269
PVT SYSTEM
12.Remove the snap ring i, thrust washer o, and thrust
bearing a.
13.Remove the driven clutch from the transmission input
shaft by holding both sheaves together and pulling
straight off. 5
CAUTION
The driven clutch is held together by the snap ring that
was removed in the previous step. The driven clutch will
become damaged if it is dropped.
9928689 - 2018 RZR RS1 Service Manual 5.17
© Copyright Polaris Industries Inc.