Page 266 - Manual Oficina Polaris RS1 2018 e 2019
P. 266
PVT SYSTEM
TORQUE TORQUE
Spider Nut: Drive Clutch Cover Fasteners:
300 ft-lb (407 Nm) 9 ft-lb (12 Nm)
8. Once the clutch is fully assembled, ensure the
Drive Clutch Holding Fixture:
reference marks you made on the stationary sheave,
2871358-B moveable sheave, spider and cover are properly
aligned.
5. Install the spring r and the spring spacer e.
6. Place the drive clutch in a clutch compression tool. IMPORTANT
7. Install the six fasteners q retaining the drive clutch Failure to assemble the clutch exactly how it was taken
cover. Torque fasteners to specification.
apart will cause the clutch to be out of balance and
require clutch replacement.
5.14 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.