Page 320 - Manual Oficina Polaris RS1 2018 e 2019

FINAL DRIVE

TORQUE 9. Install wheel and four wheel nuts. Torque wheel nuts
to specification.
Lower Shock Bolt to Trailing Arm:
70 ft-lbs (95 Nm) TORQUE
Wheel Nuts:
5. Install the stabilizer bar mounting bolt, washer and 120 ft-lbs (163 Nm)
new nut. Torque fastener to specification.
TORQUE
Stabilizer Bar Linkage:
40 ft-lbs (54 Nm)

6. Apply Anti-Seize to drive shaft axle splines.
7. Install rear wheel hub assembly e. Install one cone
washer r and castle nut. Torque castle nut to
specification. Install new cotter pin t.

TORQUE

Rear Hub Castle Nut:
180 ft-lbs (244 Nm)

8. Install the radius rod bolts, washers and new nuts.
Torque fasteners to specification.

TORQUE
Radius Rods to Bearing Carrier:
M10: 40 ft-lb (54 Nm)

7.14 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.