Page 315 - Manual Oficina Polaris RS1 2018 e 2019

FINAL DRIVE

4. Install rear wheel hub assembly w, cone washer e, 6. Torque wheel hub nut to specification and install a
and hand tighten the castle nut. Install washer with new cotter pin t. Tighten nut slightly if necessary to
domed side out. align cotter pin holes.

5. Install the rear brake caliper assembly and new bolts
TORQUE
r. Torque to specification.
Hub Castle Nut:
180 ft-lbs (244 Nm)

7. Install wheel and four wheel nuts. Torque wheel nuts
to specification.

TORQUE
Wheel Nuts:
120 ft-lbs (163 Nm) 7

8. Rotate wheel and check for smooth operation. Bend
both ends of cotter pin around end of spindle in
different directions.

TORQUE
Rear Caliper Mounting Bolts:
46 ft-lbs (62 Nm)

9928689 - 2018 RZR RS1 Service Manual 7.9
© Copyright Polaris Industries Inc.