Page 326 - Manual Oficina Polaris RS1 2018 e 2019
P. 326
FINAL DRIVE
9. Remove four fasteners i retaining the rear prop 12.From the prop shaft access hole, remove two
shaft to the transmission coupler. Move the prop shaft fasteners d from the inner fuel tank support bracket
off the coupler towards the outside of the vehicle. f.
10.Locate front prop shaft roll pin and use Roll Pin 13.From under the vehicle, remove the rear fastener g
Removal Tool to remove the roll pin. Discard roll pin. from the inner fuel tank support bracket. Leave the
bracket in its position.
11. Remove 20 fasteners o and remove front a and rear
s skid plates. 14.Remove two fasteners h from the prop shaft hoop j
. Remove the prop shaft hoop.
15.Disengage rear prop shaft k from the front prop shaft
l.
7.20 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
