Page 330 - Manual Oficina Polaris RS1 2018 e 2019

FINAL DRIVE

6. Using an appropriate bearing/bushing installation
sleeve, drive the support bearing assembly onto the
prop shaft until it seats against the shoulder on the
shaft.

NOTE
Only drive on the inner race of the bearing. Driving on
the bearing in any other location will damage the
bearing.
7. Wipe the bearing and shaft clean of any excess
retaining compound.
NOTE
®
Do not allow any Loctite to get in the bearing.
8. Install the rear prop shaft into the vehicle (see “Prop
Shaft Installation” outlined in this chapter).

7.24 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.