Page 343 - Manual Oficina Polaris RS1 2018 e 2019

FINAL DRIVE

FRONT GEARCASE INSTALLATION 7. Install upper ball joint pinch bolt q on either side of
the vehicle. Torque bolts to specification.
1. Install the gearcase back into the vehicle through the
RH wheel well area, between upper and lower A-
arms.

TORQUE
Ball Joint Pinch Bolt:
2. Lubricate the front gearcase splines with Anti-Seize.
3. Install the prop shaft onto the front gearcase input 40 ft-lbs (54 Nm)
shaft. Use a NEW spring pin in the front propshaft.
4. Install vent line and connect the AWD harness. 8. Install lower shock mounting fasteners w on either
5. Install drive shaft into the front gearcase and steering side of the vehicle. Torque fasteners to specification.
knuckle. Repeat for opposite side of the vehicle.

7

TORQUE
6. Install upper control arm into steering knuckle.
Repeat for opposite side of vehicle. Shock Mounting Fasteners:
40 ft-lb (54 Nm)

9928689 - 2018 RZR RS1 Service Manual 7.37
© Copyright Polaris Industries Inc.