Page 344 - Manual Oficina Polaris RS1 2018 e 2019

FINAL DRIVE

9. Install both front hub assemblies e and washers r. TORQUE
Front Brake Caliper Mounting Bolts:
30 ft-lb (41 Nm)

12.Install front wheel scrapers o and fasteners a.
Torque fasteners to specification.

10.Install both front hub castle nuts t. Torque nuts to
specification. Install cotter pins y.

TORQUE
Wheel Scraper Mounting Fasteners:
7 ft-lbs (10 Nm)

13.Install lower stabilizer bar link fastener s. Torque
fastener to specification. Repeat on opposite side of
vehicle.

NOTE
Hub Castle Nut:
180 ft-lbs (244 Nm)

11. Install front brake calipers u and mounting bolts i.
Torque bolts to specification.

TORQUE
Stabilizer Bar Linkage:
40 ft-lbs (54 Nm)

7.38 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.