Page 342 - Manual Oficina Polaris RS1 2018 e 2019

FINAL DRIVE

10.Carefully install the ring gear and roll cage assembly 13.Install the output cover assembly a onto the
i into the gearcase housing. gearcase housing. Install the nine cover plate screws
s and torque to specification.

11. Install a new O-ring on the cover plate assembly.
NOTE
Be sure the square O-ring is placed flat on the cover
surface. If the O-ring is twisted, fluid leakage may
occur.

12.Carefully install the LH output hub assembly o into
the cover plate. Take care not to damage the new
cover plate seal while installing the output hub.

TORQUE
Cover Plate Screws:
11 ft-lbs (15 Nm)

7.36 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.