Page 341 - Manual Oficina Polaris RS1 2018 e 2019

FINAL DRIVE

6. Carefully install the rollers e into the roll cage 8. Check the action of the springs by rotating in both
assembly while installing the assembly into the clutch directions to ensure the spring and retainer are
housing. installed properly.

9. Install the armature plate y and cage plate u. Be
NOTE
sure all of the armature plate tabs are fully engaged
Install roll cage so the ring gear grooves line up with the into the roll cage assembly and that it is resting
roll cage windows. Be sure roll cage top groove is properly on the spring retainer. Be sure the cage plate
facing upward. is resting properly on the spring retainer, and all tabs
are fully engaged.
7. Install the springs r and spring retainer assembly t
onto the ring gear.

7

NOTE
Verify armature plate tabs are in the roll cage slots and
that it rests properly on the spring retainer.

9928689 - 2018 RZR RS1 Service Manual 7.35
© Copyright Polaris Industries Inc.