Page 353 - Manual Oficina Polaris RS1 2018 e 2019

STEERING / SUSPENSION

UPPER STEERING SHAFT REMOVAL 3. Remove the pinch bolt y retaining the upper steering
shaft to the power steering unit.
1. Remove three push-darts q, two screws w and
remove the left lower storage compartment e from
the vehicle.

4. Lift the steering wheel up and remove the four
fasteners u that retain the pivot tube.
CAUTION

Use caution to avoid damaging the 12V receptacle
when removing storage compartment.

2. Remove three push-darts r and two screws t from
the right lower storage compartment. Do not remove
storage compartment

8
5. Remove the steering shaft, pivot tube and steering
wheel from the vehicle as an assembly.

6. If replacing the upper steering shaft or steering wheel,
refer to “Steering Wheel Removal” outlined in this
chapter.

9928689 - 2018 RZR RS1 Service Manual 8.5
© Copyright Polaris Industries Inc.