Page 357 - Manual Oficina Polaris RS1 2018 e 2019

STEERING / SUSPENSION

5. Remove four T40 Torx screws r and remove the 11. Remove the two front drive isolator fasteners a.
battery box t.

12.Remove three fasteners s retaining the front drive
6. Remove four fasteners y and remove the battery mounting bracket d to the vehicle. Remove front
tray mounting plate u. drive mounting bracket.
13.Repeat previous step on the opposite side of the
vehicle.

8
7. Disconnect front gearcase wiring harness.
8. Raise the front of the vehicle.
9. Remove both front wheels. 14.Remove two mounting fasteners f from RH steering
10.Remove left tie rod end nut i, and remove tie rod rack mounting cast g and remove the mounting cast.
end joint o with a proper pulling tool. Repeat for the
opposite side of the vehicle.

9928689 - 2018 RZR RS1 Service Manual 8.9
© Copyright Polaris Industries Inc.