Page 355 - Manual Oficina Polaris RS1 2018 e 2019

STEERING / SUSPENSION

3. Remove the pinch bolt w retaining the lower steering 5. Carefully remove the power steering unit, mounting
shaft to the power steering unit. bracket, and brake pedal from the vehicle as an
assembly.

Remove circlip e and pin r retaining brake pedal to
master cylinder. 6. If replacing the power steering unit, remove the three
bolts that retain the power steering unit to the mount
bracket.

IMPORTANT
Electronic Power Steering (EPS) units are programmed
to be vehicle specific and are not interchangeable
between product lines.

8
4. While supporting the power steering unit, remove the
four nuts t from the mount bracket.

9928689 - 2018 RZR RS1 Service Manual 8.7
© Copyright Polaris Industries Inc.