Page 485 - Manual Oficina Polaris RS1 2018 e 2019

ELECTRICAL

3. Support the bottom of engine and transmission and NOTE
remove inner PVT fasteners a .
To aid in removal, use a 15mm crows foot and
extension to better access the top nut on the right hand
side of the vehicle.

NOTE
The drive clutch side are T45 screws with washers. The
driven clutch side are hex head 15mm through bolts
with nylok nuts on the right hand side.

4. While removing the inner PVT cover, disconnect three
hinge clips connecting main harness to inner PVT
cover.

11

9928689 - 2018 RZR RS1 Service Manual 11.37
© Copyright Polaris Industries Inc.