Page 122 - Manual Oficina Polaris RZR 570 13-18

ENGINE / COOLING SYSTEM

19. Using a brass drift, remove the water pump drive 22. Thoroughly clean the stator cover.
shaft. Be sure not to damage the threads. Inspect
shaft for wear or damage, replace if necessary. 23. Press in a new water pump drive shaft bearing until it
is fully seated in the cover.

CAUTION
Be sure bearing is fully seated in cover or severe
engine damage may result.

24. Clean and de-grease the water pump drive shaft i.

20. Extract the mechanical seal t and the oil seal y
from the stator cover.

25. Press in the water pump drive shaft into the bearing
using PU-50869 Item #1.

21. Press out the water pump drive shaft bearing u from
the stator cover. Discard bearing and replace with
new.

Water Pump Assembly

3.24 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.