Page 368 - Manual Oficina Polaris RZR 570 13-18

STEERING / SUSPENSION

3. Loosen the nut and back it half way off the steering POWER STEERING UNIT REMOVAL
shaft. 1. Remove the upper steering shaft, pivot tube and
steering wheel from the vehicle as an assembly.
Refer to Upper Steering Shaft Removal (EPS
Models), page 8.7.
CAUTION

Striking the steering wheel or steering shaft while
installed in the vehicle can permanently damage the
EPS unit and cause a Power Steering Fault.

2. Disconnect the two electrical harnesses q from the
power steering unit.

4. Place the assembly in a vise.
5. Using a large bronze drift and hammer, strike the
steering shaft nut to pop the steering wheel off the
shaft taper.

3. Remove the pinch bolt w retaining the lower steering
shaft to the power steering unit.

6. Once the steering wheel pops loose, completely
remove the nut and lift the steering wheel off the
shaft.

4. While supporting the power steering unit, remove the
four nuts e from the mount bracket.
5. Carefully remove the power steering unit and mount
bracket from the vehicle as an assembly.

8.8 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.