Page 370 - Manual Oficina Polaris RZR 570 13-18

STEERING / SUSPENSION

POWER STEERING UNIT INSTALLATION 7. Reinstall the throttle pedal return spring.
1. If the power steering unit was removed from the
mount bracket, reinstall it prior to vehicle installation.
Torque the mounting bolts to specification.
2. Remove the throttle pedal return spring to ease
power steering unit installation.
3. Install the power steering unit into the vehicle and
align the skip-tooth spline on the power steering stub
shaft with the opening in the lower steering shaft.
4. Place power steering mount bracket over the brake
pedal mount studs and finger tighten the four nuts.
5. Position the lower steering shaft on the power
steering stub shaft and install the pinch bolt w.
Torque to specification.

8. Proceed to Upper Steering Shaft Installation (EPS),
page 8.11 to complete the installation procedure.

TORQUE
Lower Steering Shaft to EPS Unit:
16 ft-lbs (22 Nm)

6. Torque the four mount bracket nuts e to
specification.
TORQUE

Power Steering Mount Bracket Nuts:
16 ft-lbs (22 Nm)

8.10 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.