Page 369 - Manual Oficina Polaris RZR 570 13-18

STEERING / SUSPENSION

6. If replacing the power steering unit, remove the four LOWER STEERING SHAFT INSTALLATION
bolts r that retain the power steering unit to the (EPS)
mount bracket.
1. Install the lower steering shaft onto the gear box and
align the marks made during step 2 of the Lower
Steering Shaft Removal (EPS Models), page 8.9
procedure.
2. Install the pinch bolt that retains the lower steering
shaft to the gear box assembly and torque to
specification.

TORQUE
Steering Shaft to Steering Box Fasteners:
36 ft-lb (48 Nm)

3. Install the power steering unit and reassemble the
vehicle (Refer to Power Steering Unit Installation,
page 8.10).

WARNING
Electronic Power Steering (EPS) units are programmed
to be vehicle specific and are not interchangeable
between product lines.

LOWER STEERING SHAFT REMOVAL (EPS
MODELS)
1. Use the steering wheel to position the front wheels
so they point straight ahead.
2. Locate the lower steering shaft through the left front
wheel well. Mark the lower steering shaft, steering
box stub shaft and steering box with a white paint
marker to aid in installation. 8
3. Remove the power steering unit (Refer to Power
Steering Unit Removal, page 8.8).
4. Remove the pinch bolt q retaining the lower steering
shaft to the steering gear box assembly.

5. Lift up on the shaft and remove it through the floor
panel.

9926813 R06 - 2013-2016 RZR 570 Service Manual 8.9
© Copyright Polaris Industries Inc.