Page 86 - Manual Oficina Polaris RZR 570 13-18

MAINTENANCE

TRANSMISSION AND FRONT GEARCASE

SPECIFICATION CHART

FILL / DRAIN PLUG
GEARCASE LUBRICANT CAPACITY
TORQUE
Transmission AGL Gearcase Lubricant 44 oz. (1300 ml) 12 ft-lbs (16 Nm)
Transmission LE / INTL AGL Gearcase Lubricant 41 oz. (1200 ml) 12 ft-lbs (16 Nm)
Front Gearcase Demand Drive 6.75 oz. (200 ml) 10 ft-lbs (14 Nm)

TRANSMISSION LUBRICATION 4. Reinstall the fill plug and torque to specification.

NOTE TORQUE
It is important to follow the transmission maintenance Fill / Drain Plug:
intervals described in the Periodic Maintenance Chart. 12 ft-lbs (16 Nm)
Regular lubricant level inspections should be performed
as well.
Transmission Lubricant Change
The drain plug w is located on the bottom of the
The transmission lubricant level should be checked and
changed in accordance with the maintenance schedule. transmission gearcase. Access the drain plug
through the drain hole in the skid plate.
• Be sure vehicle is positioned on a level surface when
checking or changing the lubricant. 5. Remove the fill plug.
• Check vent hose to be sure it is routed properly and 6. Place a drain pan under the transmission drain plug.
unobstructed.
7. Remove drain plug and allow lubricant to drain
Transmission Lubricant Level Check completely.
The fill plug is located on the rear portion of the 8. Clean the drain plug magnetic surface.
transmission gearcase. Access the fill plug at the rear of
the vehicle. Maintain lubricant level even with the bottom 9. Reinstall drain plug with a new O-ring and torque to
of the fill plug hole. specification.
1. Position vehicle on a level surface. 10. Add the recommended amount of lubricant through
the fill plug hole. Maintain the lubricant level at the
2. Remove the fill plug q and check the lubricant level.
bottom of the fill plug hole when filling the
transmission. Do not overfill.
FLUID CAPACITY
Recommended Transmission Lubricant:
AGL Gearcase Lubricant
2878068 (Quart)
Capacity: 44 oz. (1300 ml)
Capacity: LE / INTL: 41 oz. (1200 ml)

11. Reinstall fill plug with a new O-ring and torque to
specification.
TORQUE
Fill / Drain Plug:
12 ft-lbs (16 Nm)
3. If lubricant level is not even with the bottom threads,
add the recommended lubricant as needed. Do not
overfill. 12. Check for leaks. Dispose of used lubricant properly.

2.46 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.