Page 231 - Manual_Polaris_RZR_ProXP-20-21

ENGINE / COOLING SYSTEM

14.Install the eleven M6 o and two M8 i upper 19.Install dowel pins s into oil pump mounting holes.
crankcase bolts. Tighten all bolts lightly by hand.

3

20.Install the three bolts d that retain oil pump to the
15.Torque the upper crankcase bolts in sequence to crankcase. Torque mounting bolts to specification.
specification. Repeat the sequence to verify final
torque.

TORQUE
Oil Pump Mounting Bolts:
TORQUE
7 ft-lbs (10 Nm)
Upper Crankcase Bolts:
M8 Bolts:
26 ft-lb (35 Nm) 21.Reinstall oil pump pick-up f. Torque mounting screw
g to specification.
M6 Bolts:
9 ft-lb (12 Nm) TORQUE
Oil Pump Pick-Up Retaining Screw:
7 ft-lb (10 Nm)
16.Rotate the engine so the cylinder is facing down.
17.Install a new seal on the oil pump.
22.Clean the gasket sealing surfaces on oil sump cover
18.Lift the oil pump drive chain and install the oil pump. and crankcase to remove old gasket material and any
oil.

NOTICE
Gasket surfaces must be DRY and oil free. Use care
upon assembly to keep oil away.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 3.87
© Copyright Polaris Industries Inc.