Page 322 - Manual_Polaris_RZR_ProXP-20-21

PVT SYSTEM

2. Remove fourteen fasteners w that retain the outer 5. Walk the belt out of the driven clutch and drive clutch.
clutch cover. Remove the clutch cover. Remove the belt from the vehicle.
6. Remove the driven clutch retaining bolt r, washer t,
and shim y.

NOTICE
Outer cover fasteners are captured fasteners and will
remain in the outer cover when loosened. 7. Remove the driven clutch from the transmission input
shaft by holding both sheaves together and pulling
straight off.
3. Mark the drive belt direction of rotation so that it can
be installed in the same direction.
CAUTION
4. Insert clutch spreader tool e into the driven clutch
and turn the tool clockwise to open the sheaves on The driven clutch will become damaged if it is dropped.
the driven clutch.

NOTICE
The driven clutch spreader tool is included with the
vehicle’s tool kit

6.32 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.