Page 355 - Manual_Polaris_RZR_ProXP-20-21

TRANSMISSION

NOTICE 6. Install the shift shaft rail s and shift forks into the
transmission housing as an assembly. Be sure the
Refer to the exploded view at the end of this chapter as shift forks are engaged into the engagement dogs.
a reference.
NOTICE
1. Install the idler shaft k and reverse shaft j together Shift fork pins should be offset towards the input shaft
into the case. as shown.

2. Install the transmission input shaft h into the case.
3. Install idler gear assemblyg.
4. Install rear output shaft assembly f. 7. Inspect the shift drum for any damage or wear.
Inspect the splines of the shift drum.

7

5. Assemble the shift shaft rail if previously
disassembled. 8. Install the shift drum into the transmission housing.
Lift up on the shift shaft rail and move the rail
NOTICE
assembly towards the shift drum to allow the shift fork
Both shift forks need to be oriented the same way, so ends to be installed into the shift drum.
that the shift fork pins are both offset to the same side
of the rail.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 7.17
© Copyright Polaris Industries Inc.