Page 352 - Manual_Polaris_RZR_ProXP-20-21

TRANSMISSION

1. Using the Snorkel Tube Tool and two of the coupler 3. Extract the snorkel shaft seal g from the snorkel tube
bolts to hold the coupler, remove the front output o by drilling a small pilot hole and threading a screw
shaft coupler nut q and washers w. in to slowly pull the seal out.

Snorkel Tube Tool: e Snap Ring o Snorkel Tube
PU-51862
r Thrust Washer a Bearing
2. Use the snorkel tube tool to remove the snorkel tube t Bearing s Snap Ring
and front output shaft as an assembly. y Ring Gear d Thrust Washer
u Front Output Shaft f Snap Ring
i O-Ring g Seal

4. Once the three snap rings es&f are removed, use
an arbor press to remove the snorkel tube and other
components from the shaft.

CAUTION
Support the end face of the gear teeth when pushing
the shaft through or damage to the gear teeth may
occur.

7.14 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.