Page 423 - Manual_Polaris_RZR_ProXP-20-21

STEERING / SUSPENSION

2. Insert new A-arm bushings and pivot tube into new A- FRONT STABILIZER BAR
arm. REPLACEMENT
3. Install new upper A-arm assembly onto vehicle frame. REMOVAL
Torque new bolt to specification.
1. Remove the fasteners q retaining the front stabilizer
TORQUE bar link to the upper control arm.
Front Upper A-arm Bolts:
74 ft-lbs (100 Nm)

4. Insert upper A-arm ball joint end into the bearing
carrier. Install upper ball joint pinch bolt into the
bearing carrier and torque bolt to specification.
TORQUE
Front Ball Joint Pinch Bolts:
44 ft-lbs (60 Nm)

5. Install the nut retaining the front stabilizer bar link to
the upper control arm.. Torque fasteners to
specification.
2. Remove the Fasteners w retaining the stabilizer bar
TORQUE
mount to the frame.
Stabilizer Bar Link Fasteners:
74 ft-lbs (100 Nm)

6. Attach shock to A-arm with fastener. Torque lower
shock bolt to specification.

TORQUE
Front Shock Mounting Bolts:
44 ft-lbs (60 Nm)

9

3. Remove the fasteners e retaining the stabilizer bar
link to the stabilizer bar.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 9.19
© Copyright Polaris Industries Inc.