Page 147 - Manual Oficina XP 1000 14-16

ENGINE / COOLING SYSTEM

6. Apply Polaris PS-4 engine oil to each rod bearing 11. Clean bolt hole threads in connecting rod to remove
journal r and main bearing journal t of crankshaft. all oil.
12. Install matching rod cap on connecting rod with 3
digit serial number stampings aligned w & e.

3

7. Loop cam chain y and oil pump drive chain i over
crankshaft sprockets.
8. Apply Polaris PS-4 engine oil to the new crankshaft
oil seal u and install the seal on the PTO end of the 13. Install new bolts s and tighten evenly until snug.
crankshaft.

14. Torque connecting rod bolts to specification.
9. Carefully lower the crankshaft into upper crankcase.
Guide connecting rods onto the rod journals of TORQUE
crankshaft as necessary. Connecting Rod Bolts:
Step 1: 9 ft-lbs (12 Nm)
Step 2: 13 ft-lb (18 Nm)
Step 3: Tighten add’n 105°

10. Adjust the PTO crankshaft seal so it rests properly in
the upper crankcase.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 3.69
© Copyright Polaris Industries Inc.