Page 151 - Manual Oficina XP 1000 14-16

ENGINE / COOLING SYSTEM

17. Install dowel pins a into oil pump mounting holes. 21. Apply a thin, continuous film of Crankcase Sealant
(PN 2871557) to sump cover mating surface g as
shown. Do not allow sealant to dry before assembly.

3

18. Install the three bolts f that retain oil pump d to the
crankcase. Torque mounting bolts to specification.
22. Install the oil sump cover h onto the crankcase.

TORQUE 23. Install the thirteen M6 j and three M8 bolts that
Oil Pump Mounting Bolts: retain the oil sump cover k to the crankcase.
7 ft-lbs (10 Nm)

19. Reinstall oil pump pick-up s. Torque mounting
screws to specification.
TORQUE
Oil Pump Pick-Up Retaining Screws:
7 ft-lb (10 Nm)

20. Clean the gasket sealing surfaces on oil sump cover
and crankcase to remove old gasket material and
any oil.
NOTE
Gasket surfaces must be DRY and oil free. Use care
upon assembly to keep oil away.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 3.73
© Copyright Polaris Industries Inc.