Page 150 - Manual Oficina XP 1000 14-16
P. 150
ENGINE / COOLING SYSTEM
10. Torque lower crankcase bolts in sequence to 13. Torque the upper crankcase bolts in sequence to
specification. Repeat sequence to verify final torque. specification (start with #12). Repeat the sequence
to verify final torque.
TORQUE
TORQUE
Lower Crankcase Bolts:
M10 Bolts: Upper Crankcase Bolts:
Step 1: 9 ft-lb (12 Nm) M8 Bolts: 26 ft-lb (35 Nm)
Step 2: 21 ft-lb (28 Nm)
M6 Bolts: 9 ft-lb (12 Nm)
Step 3: Tighten add’n 90°
14. Rotate the engine so the cylinder is facing down.
M8 Bolts:
26 ft-lb (35 Nm) 15. Install a new seal on the oil pump.
16. Lift the oil pump drive chain and install the oil pump.
M6 Bolts:
9 ft-lb (12 Nm)
11. Rotate the engine so the cylinder is facing up.
12. Install the eleven M6 o and two M8 i upper
crankcase bolts. Tighten all bolts lightly by hand.
3.72 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
