Page 236 - Manual Oficina XP 1000 14-16

PVT SYSTEM

13. Loosen the hose clamp e attaching PVT inlet duct to PVT ASSEMBLY
the inner clutch cover. Disengage the hose from the 1. Inspect inner clutch cover. Replace if cracked or
inner clutch cover. damaged.

2. Inspect the seal on the transmission input shaft.
Replace if damaged.

3. Inspect inner clutch cover seal q (engine side).
Replace if cracked, torn or damaged.

14. Loosen hose clamps r that attach clutch outlet duct
to inner clutch cover. Disengage hose from the
cover.

4. Apply silicone around all seven screw holes on the
inner clutch cover.
IMPORTANT
DO NOT apply silicone on drive and driven shaft
inner cover donuts.

5. Install and properly align the inner clutch cover. Be
sure the fuel line, vent line and battery cables are
properly routed through the guard plate as shown w.

15. Remove the seven bolts t that retain inner clutch
cover to engine and transmission. Remove inner
clutch cover.

5.12 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.