Page 239 - Manual Oficina XP 1000 14-16

PVT SYSTEM

12.Remove the drive clutch retaining bolt and remove 14.Remove the seven bolts r that retain inner clutch
the drive clutch using Drive Clutch Puller. cover to engine and transmission. Remove inner
clutch cover.

Drive Clutch Puller:
2872085
PVT ASSEMBLY (2016) 5
NOTE 1. Inspect inner clutch cover. Replace if cracked or
damaged.
Be sure to use the correct Drive Clutch Puller to prevent
damage to crankshaft. 2. Inspect the seal on the transmission input shaft.
Replace if damaged.
3. Inspect inner clutch cover seal q (engine side).
13.Remove the four push rivets that secure the upper Replace if cracked, torn or damaged.
guard plate to the top of the inner PVT cover. Make
note of the routing of the fuel lines, vent line, battery
cable and wire harness for proper assembly.

4. Apply silicone around all seven screw holes on the
inner clutch cover.
IMPORTANT
DO NOT apply silicone on drive and driven shaft
inner cover donuts.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 5.15
© Copyright Polaris Industries Inc.