Page 131 - Manual Oficina Polaris RZR XP 1000 17-18
P. 131
ENGINE / COOLING SYSTEM
CRANKSHAFT PTO SEAL INSTALLATION 2. Tighten the drive bolt e until the cylinder r bottoms
out against the crankcase.
1. Install new seal w into crankcase. Thread the drive
bolt of special tool PU-52493 q into the crankshaft.
3
3. Once the seal is properly installed, loosen the drive
bolt e and remove special tool PU-52493 from the
IMPORTANT crankshaft.
The orientation of the seal is critical. Install the seal with 4. Refer to Inner PVT Cover installation.
the flat side of the seal facing out as shown.
5. Field test the vehicle before putting back into service.
Inspect for any leaks.
9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 3.23
© Copyright Polaris Industries Inc.
