Page 134 - Manual Oficina Polaris RZR XP 1000 17-18

ENGINE / COOLING SYSTEM

22. Use an overhead or portable engine hoist and 26. Remove the starter motor bolts 2) and starter motor
suitable engine straps to secure engine in its current from the engine.
position.

23. Remove the four rear mounting bolts j that attach
the rear of the engine to the transmission.

27. Remove the six transmission joint bracket bolts 2!
and transmission joint bracket 2@ from the engine.
28. Install the engine stand adapter (PU-50562) onto the
engine where the starter motor was located.
NOTE
29. Select the proper engine stand sleeve adapter and
It is not necessary to remove the bolts that retain the install it onto the engine stand adapter.
bracket k to the transmission.
• Sleeve adapter for a 2″ bore engine stand:
24. Remove the four front engine mounting bolts l and
nuts 1(. • (PU-50625)
• Sleeve adapter for a 2.375″ bore engine stand:
• (PW-47054)
30. Place engine onto the engine stand (PU- 50624) for
service.

25. With the help of an assistant and the engine hoist,
raise the engine vertically out of the vehicle frame.
NOTE

Have an assistant help guide the engine in and out of
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.

3.26 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.