Page 365 - Manual Oficina Polaris RZR XP 1000 17-18

FINAL DRIVE

BEADLOCK RIMS (IF EQUIPPED) 7. Seat bead and inflate to 16 psi.
Some RZR XP 1000 LE models comes with Walker
Evans™ beadlock rims. The beadlock does not come set
up from factory, but may be changed to use the beadlock
feature.
To make the beadlock rim functional:

1. Deflate the tire.
2. Remove the beadlock screws and beadlock ring.

3. Dismount the tire on the side with the beadlock holes.
4. Place the beadlock ring so the tire is sandwiched
between the rim and the ring making sure the valve 7
stem is aligned with the slot in the ring.
5. Install bolts and thread them to 24 in-lbs (3 Nm).

6. Tighten in a criss-cross pattern to 7 ft-lbs (10 Nm).

TORQUE
Beadlock Screws:
Step 1: 24 in-lbs (3 Nm)Step 2: 7 ft-lbs (10 Nm)

NOTE
Beadlock bolts should be checked and torqued every
300 miles (450 km).

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 7.39
© Copyright Polaris Industries Inc.