Page 361 - Manual Oficina Polaris RZR XP 1000 17-18

FINAL DRIVE

5. Carefully install the rollers e into the roll cage 7. Align spring retainer dowel pin t with ring gear
assembly while installing the assembly into the dowel pin y and install the retainer on top of the
clutch housing. torsion spring.

8. Check the action of the torsion spring by rotating in
NOTICE
both directions to ensure the spring and retainer are
Install roll cage so that the ring gear grooves line up installed properly.
with the roll cage windows (see below). Be sure role
cage top groove is facing upward.

6. Install the torsion spring r by wrapping each leg of
the spring around the dowel pin on the ring gear.

7

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 7.35
© Copyright Polaris Industries Inc.