Page 498 - Manual Oficina Polaris RZR XP 1000 17-18
P. 498
ELECTRICAL
NOTE 11. After entering the password correctly you should see
a message displaying "GoPro Successfully
Polaris recommends the use of a MicroSD card Connected". Select “OK”.
comparable to a SanDisk Extreme Plus for optimal
experience. 12.Press "Preview" on the display to pull an image
preview and confirm that the camera is operating
properly.
• To record an image or video press the Capture button
in the top right quarter of the screen.
• To view previously taken images and still images of
videos press the Media icon.
• To add and delete GoPros press the Camera icon.
• The icons in the bottom right corner allow the camera
mode to be changed between video, picture, burst,
and time lapse.
NOTE
Preview image will be disabled when traveling at
1. Turn on the GoPro camera by pressing the power speeds over 15 MPH.
button.
2. Turn on the GoPro’s Wi-Fi by holding the side button ENGINE OVERHEAT INDICATORS
until a blue light flashes (you should see a Wi-Fi
signal on the GoPro display). The engine temperature scale at the right side of the
Display screen changes to RED and the check engine
3. In order to connect a GoPro to the display navigate to temperature indicator at the top left of the screen
Apps Screen. illuminates when the engine is overheating. Take action
to cool the engine.
4. Select the GoPro icon.
5. Select the "Camera" icon.
6. Select the "+(camera)" icon in the lower right corner
of the display.
7. Select "Continue" if the on screen criteria has been
met.
The indicator will flash when engine temperature reaches
critical levels. Stop the engine immediately.
A flashing indicator indicates continued operation could
result in serious engine damage. The engine
management system will automatically reduce engine
power and create a misfire condition. Stop the engine
8. Select the "+" icon next to the name of your camera. immediately. Allow the engine to cool down.
9. Select the type of GoPro device that you are trying to USB HARDWARE RECOMMENDATIONS
connect to the display. For software updates, Polaris recommends using a
SanDisk® or similar USB flash drive with a minimum of 4
10.Enter the password of the GoPro to connect it to the
display. GB in available memory, formatted using the FAT32 file
system. For assistance, search the web for “How to
11.30 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
