Page 500 - Manual Oficina Polaris RZR XP 1000 17-18

ELECTRICAL

RIDE COMMAND TROUBLESHOOTING
Problem: Black Screen / Will Not Power On

STEP ACTION YES NO

Power cycle by switching ignition on and off with main power switch.
1 Did you find and repair the condition? Go to Step 8 Go to Step 2

Check the 5amp fuse labeled INST in the main fuse box.
2 Refer to Fuse Boxpage 11.59. Go to Step 9 Go to Step 3
Is the fuse blown?
Reinstall INST fuse and test screen for proper operation.
3 Did you find and repair the condition? Go to Step 8 Go to Step 4

1. Turn ignition on
2. Check for battery voltage on pin 16 (Ground), 31 (Switched Power)
4 and 32 (Battery Power) of display connector. Go to Step 8 Go to Step 5
Is there Battery Voltage at all pins?

Refer to the wiring schematic and check circuits without voltage for Go to Step 1
5 continuity and proper operation. Go to Step 7 and repeat
Did you find any problems in the circuit? diagnosis

Replace display with known good display. Go to Step 1
6 Did you find and repair the condition? Go to Step 8 and repeat
diagnosis
Repair, replace and check all affected power/ground circuits. Go to Step 1
7 Check for battery voltage at pin 16, 31 and 32. Go to Step 8 and repeat
Is there battery voltage at pin 16, 31 and 32? diagnosis

Update display with newest software available. Confirm
Refer to Update Software / Mapspage 11.31 for instructions on how to display
8 update/reflash software. operation and Go to Step 6
Is display working properly? continue use.
1. Test circuit for continuity and/or shorts in wiring.
9 2. Fix any shorts in the wiring and reinstall new fuse. Go to Step 8 Go to Step 4
Did you find and repair the condition?

11.32 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.